E-mail: [email protected] LIVE CHAT

ABOUT US

HOME  /   PRODUCT  /   Mineral Processing Equipment  /   Shaking Table

Shaking Table

FTM shaking table is one of the main equipment of gravity concentration. It widely applies in the classification of tungsten, tin, tantalum, niobium and other rare metals and precious metals ore and can also be used for classification iron, manganese ore and coal. When dealing with tungsten, tin ore, the table effective recycling granularity scope is 2-0.02 mm. 6-S table enjoy the advantages of high rich ore ratio, high classification efficiency, safeguards easily and easy to adjust stroke.

Working principle:

Beneficiation process is in an inclined bed to strip on the surface, the particle swarm was fed into the shaking table from the feeding chut on the corner of the bed. At the same time, the sink will supply the landscape washing water. So the ore pellets layer on the basis of particle size and proportion under the influence of gravity, Horizontal water impact,the reciprocity and friction of the bed are done by reciprocating asymmetric motion. The ore pellets with different particle size and the proportion was running along with their direction of travel from A side to B side fan-shaped shed, and then it will be pulled out from different area of concentrate and tailings discharge end side, finally is divided to concentrate, middlings and tailings.

Working Principle of Shaking table

Technical specifications of shaking table

  • 1. Size: 4520 mm long: Feeding end 1850 mm wide; The discharging end width of 1546 mm.
  • 2. 8-36 mm, stroke.
  • 3. A 245 - 380 times.
  • 4. Feed size: 0.02-2 mm.
  • 5. The feed concentration: 25-30%.
  • 6. Processing capacity: 15-108T.
  • 7. The transverse slope adjustment range: 0-10°.
  • 8. Water consumption: 19-75 kg / min.
  • 9. A motor 1.1 kW; Speed: 1410 rpm.

Technical Data

Name Grit 
concentrator
 table
Fine sand 
concentrator
 table
Sludge 
concentrator
 table
Bed surface 
Dimensions
Length
(mm)
4450 4450 4450
Driving 
part Width
(mm)
1855 1855 1855
Concentrate 
part Width
(mm)
1546 1546 1546
Max.feeding 
size(mm)
2 0.5 0.15
Feeding 
amount
(t/d)
30-60 10-20 15-25
Feeding 
thickness
(%)
25-30 20-25 15-25
Stroke
(mm)
16-22 11-16 8-16
Frequency
(f)
45-48 48-53 50-57
Bed surface 
Water quantity
(t/d)
80-150 30-60 10-17
Bed surface 
Horizontal 
obliquity(°)
2.5-4.5 1.5-3.5 1-2
Bed surface 
Portrait 
obliquity(%)
1.4 0.92 ----
Table board 
corner(°)
32-42 40 42
Concentrating 
area(㎡)
7.6 7.6 7.6
Bed surface 
Length ratio
2.6 2.6 2.6
Shape of 
side-bed 
surface
Rectangle Zigzag Triangle
Motor 
power(kw)
1.1 1.1 1.1
Transmission 
device
Eccentricity

Send Enquiry

*
totop